131-AMT Ribbon Switch

General purpose ribbon switches designed for activation by hand, foot, or mechanical device. Available with sleeve ends or with block ends that have mounting holes (MT types). Block ends can have wire exiting from the end or back.

Actuation force 60 oz. (17 N), color light grey.

Length is cut to customer requirements.

Options
•   Custom switch lengths
•   Custom lead lengths
•   Fail-Safe leads
•   Air leak test
•   Adhesive backing
•   Interconnected switches (sausage style)

Custom colors are available on request. Please contact the factory.

Ribbon Switch Type	Style 106 Aluminum Channel	DA-12 Double-Faced Tape	Screws in Block Ends
131-A	Yes	Yes	No
131-AMT	Yes	Yes	Yes

Actuation Force:	60 oz. (17 N) (10 mm Sphere)
Bending Radius:	1 in. (25 mm) minimum for Type 131
Exterior Covering:	PVC
Color:	Light Grey
Lead Wire:	#18 AWG, 18 in. (460 mm) long (Standard)
Dimensions:	3/4 in. wide, 3/16 in. high (19.1 mm x 4.8 mm )
Recommended Voltage & Current:	24 VAC or VDC at 1 amp max.
Dielectric Resistance:	1000 VAC for 2 minutes